|
|
http://rc.runryder.com/helicopter/t594832p1/ 意外看到这里在讨论
Straight from Mikado:
Thanks for your interest in our model helicopters. LOGO 700 will be coming out toward the end of the year. This is an estimate at the moment, as it is still in the prototyping phase.
It will have a torque tube.
Kind regards
Inge Lasser
MIKADO
Mikado说年底会出700，是轴传动的。
据传闻 (仅仅是传闻，不知真实性），轴传是RJX开发的
RJX torque tubeI heard rumors (who knows if they are true) ...that RJX was working with Mikado on the torque tube design..
I will see if I can dig up the RJX TT pics..from the manual..
but here is what it is..
the Torque tube itself is a 10mm OD shaft...with a 9mm ID
On each end of the TT is a one way bearing that slides in and bolts on to the 10mm TT shaft.
there are a couple of bearing supports and there is a smooth shaft that the one way grabs on to on each end..
it's actually a ZERO lash super smooth setup....and the tail rotor can spin independently of the main rotor..
RJX现有的轴传是这样滴
如果一切属实的话，那新的logo700还真的是一款很完美的飞机，拭目以待:em15:
[ 本帖最后由 garfieldhummer 于 2010-9-8 21:01 编辑 ] |
欢迎继续阅读楼主其他信息
|
/2 
发表于 2010-9-8 20:08
收藏
楼主
