|
刷写固件的过程中电脑突然宕机蓝屏。重启后再接入设备提示“无法识别的USB设备”
用了几种方法都无法识别,java环境下的刷机程序报错 Did not find matching device for VID:0x483 PID:0xdf11 alt:0
扫描了下USB端口,报告如下
=========================== USB Port3 ===========================
Connection Status : Device failed enumeration
Port Chain : 6-3
======================== USB Device ========================
+++++++++++++++++ Device Information ++++++++++++++++++
Device Description : Unknown Device
Device ID : USB\VID_0000&PID_0000\5&3FFCB76&0&3
Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0031
Legacy BusType : PNPBus
Class : USB
Service :
Enumerator : USB
Location Info : Port_#0003.Hub_#0005
Manufacturer Info : (Standard USB Host Controller)
Capabilities : Removable, RawDeviceOK
Address : 3
Problem Code : 43 (CM_PROB_FAILED_POST_START)
Power State : D3 (supported: D0, D2, D3, wake from D0, wake from D2)
---------------- Connection Information ---------------
Connection Index : 0x03
Connection Status : 0x02 (DeviceFailedEnumeration)
Current Config Value : 0x00
Device Address : 0x00
Is Hub : 0x00 (no)
Number Of Open Pipes : 0x00 (0)
Device Bus Speed : 0x00 (Low-Speed)
------------- Device Qualifier Descriptor -------------
bLength : 0x00 (0 bytes)
看来vid跟pid在宕机过程中被清零了,导致驱动无法加载,系统无法识别
请问各位高手,在这种情况下还有没办法刷机呢?
|
欢迎继续阅读楼主其他信息
|