5iMX.com 我爱模型玩家论坛 ——专业遥控模型和无人机玩家论坛（玩模型就上我爱模型，创始于2003年）

标题: 嘿嘿本人菜鸟各位仙家帮帮忙 [打印本页]

作者: 十万马力 时间: 2012-3-2 02:36
标题: 嘿嘿本人菜鸟各位仙家帮帮忙
求推荐个1500左右的油动越野最好耐艹点的谢谢各位

作者: 力动啊兵 时间: 2012-3-2 16:02
标题: 这个满意不,

Convenience of 1/10 class but with big 1/8 class excitement!
New generation 18-size engine buggy combines user-friendliness with powerful performance!

While delivering the user-friendliness and cost benefits of 1/10 class, this machine also packs the performance to match 1/8 class racing buggies. The new DBX 2.0 gets beginners off to a flying start as well as providing an ideal step up to the power of 1/8-class machines with the same long wheelbase and tread as well as 1/8 tires and wheels. The chassis features the 4-wheel independent double-wishbone suspension and fulltime 4WD drive train expected of a true racing buggy and is optimally balanced with the power of the GXR-18SP engine to deliver scintillating running performance. Whether you’re timing laps around a 1/8 racing circuit or tearing up the local dirt track, the DBX 2.0 puts the adrenalin pumping excitement of real off-road racing performance at your fingertips. As the DBX 2.0 is packaged as a fully assembled Readyset, even beginners can be off and racing with only minimal preparation.

Long 1/8 class wheelbase delivers dynamic gap running performance. Flat finish of the countersunk chassis leaves no screw heads protruding and is easily maintained.

5-spoke wheels and micro square patterned tires deliver both style and rigidity. Both are used on the 1/8 class Inferno series.

Features dirt-proof radio box for the receiver and battery. Can be attached or removed from the chassis with just four screws for easy maintenance.

Includes large capacity 103cc fuel tank to feed the 18-size engine. Delivers stable fuel supply even under severe driving conditions with run times of more than 10 minutes.

GXR-18SP engine generates optimal power output for the chassis and includes recoil starter, torque tuned muffler and large air cleaner for a longer maintenance cycle.

Features fully interchangeable suspension arms and front - rear interchangeable knuckles and shock stays. Also equipped with newly designed maintenance-friendly ball connected suspension system.

Center shaft drive with 3-differentials delivers full time 4WD. Dual disc brakes allow individual adjustment of front and rear braking power.

Separate structure of the clutch realizes optimal throttle response.

Cab forward design of the body delivers optimal down force and airborne stability as well as increasing maximum speed. Printed body requires no painting.

Enhances the easy-to-use characteristics of the 1/10 class with an even friendlier price.
Can be fitted with standard 1/8 class wheels and tires.
Equipped with large capacity oil shocks with dial adjustable chassis height setting.
Equipped with springs optimized for chassis specifications.
Powerful digital servos deliver superior controllability.
Pre-cut printed body finished in vivid color scheme.
Suspension design features multi-point setting adjustments such as chassis height, camber, tread, front and rear toe-in etc.
Gear ratio optimized for 1/8 tires.

[size=1.5em]All New Kyosho 2.4GHz Transmitter
Ultimate safety and function by the latest FHSS system


	The trim, EPA and servo reversing settings are located on the top panel of the radio for easy access, visibility, and to prevent accidental changes by bumping, knobs normally located on the front of other radios. The advanced nature of this design is ideal for beginners and intermidiate drivers.


	Two position trigger neutral point allows a 70/30 or 50/50 neutral position for the throttle/brake trigger, making it ideal for both EP and GP vehicle


	The advanced receiver design features four channels, which allows for future development and expansion. It also includes a fail-safe feature that will maintain control of your vehicle in the rare event of signal loss.

The advanced ergonomic design is very comfortable and delivers superior control. The transmitter is powered with just four AA-size alkaline batteries, which makes the Syncro balanced and lightweight, which virtually eliminates the fatigue common with heavier radios.

＜ ReadySet Contents ＞

Factory assembled chassis with pre-installed linkages
Completed pre-painted body
Syncro KT-200 Transmitter
Note) Fuel, AA sized batteries x 8 for R/C system and engine starting tools are all sold separately

＜ Required for Operation ＞

AA sized batteries x 8 for R/C system
Fuel
Plug heater
Batteries for plug heater
Fuel bottle

Chassis Technical Data

Length	475mm
Width	300mm
Height	154mm
Wheelbase	320mm
Tread (F/R)	246mm
Tire(F/R)	Φ115×45mm
Gear Ratio	12.88：1
Weight	2,365g (with body)
Engine	GXR-18SP with recoil starter

:em05:

欢迎光临 5iMX.com 我爱模型玩家论坛 ——专业遥控模型和无人机玩家论坛（玩模型就上我爱模型，创始于2003年） (http://5imx.com./)

5iMX.com 我爱模型 玩家论坛 ——专业遥控模型和无人机玩家论坛（玩模型就上我爱模型，创始于2003年）

5iMX.com 我爱模型玩家论坛 ——专业遥控模型和无人机玩家论坛（玩模型就上我爱模型，创始于2003年）