价格约1300元。
The Phoenix HV-85 has the power handling capability for just about anything you can put into the sky! With a total ability of over 4,000 watts (that's 5 horsepower!), The Phoenix HV-85 is right at home in all quarter and giant scale fixed wing aircraft, and large helicopters alike. Our factory pilot Dan Landis has one as his secret weapon for this season's FAI pattern competition, including the Nats in Muncie. Compare the price, size, and capability of the Phoenix HV-85 to the competition, and you'll understand the Castle Creations advantage. Top competition F3A, giant scale aerobatics, and large helicopters - The Phoenix HV-85 does it all, and keeps it's cool while flowing the power!
All Phoenix HV speed controls feature: | - Safe "Power On"
- Microprocessor Controlled
- Tough surface mount construction
- Audible Arming Signal
- Auto Motor cut-off with reset
- Low torque "Soft Start": protects gear boxes and belt drives from shock
| - Smooth reverse exponential throttle
- Self-calibrating endpoints: maximizes usable stick travel
- Auto shut-down when signal is lost
- Simple setup: no complicated switches or wiring
|
| Specs: | | Volts w/BEC | No BEC | | Volts NO BEC | 50 MAX | | Lipo Cells w/BEC | No BEC | | Lipo Cells NO BEC | 12S MAX | | NiCad or NiMh Cells w/BEC | No BEC | | NiCad or NiMh Cells NO BEC | 36 MAX | | BEC | None (dual opto-coupled) | | Continuous | 85 amps | | Minimum Cells | 12 cells NiMH/NiCad or 4s LiPo | | Switching Rate | Programmable
(13, 26, or 52KHz) | | Resistance | 0.0015 ohms | | Brake | Programmable | | Reversible | Yes - change any two wires | Low Voltage
Cut-off | Programmable | | Size | 1.55 x 2.8 x 1.0" | Weight
(w/wires) | 4.2 oz. (119g) | | Connector Type | Universal |
|
|  [/td] |
